小型釀酒設備對于現代化的釀酒作業來說，可以起到非常重要的效果，但是在使用過程中，容易發生漏水現象。當小型釀酒設備出現漏水現象后，應該怎樣呢？小編來為您講講。
Small brewing equipment can play a very important role in modern brewing operations, but it is prone to water leakage in the process of use. How to solve the problem of water leakage in small brewing equipment? Let me tell you something.
1、假如啤小型釀酒設備位置溫度低于-13.2攝氏度，則不能用錫焊進行修正，錫在那種低溫下會(huì )發生在金屬晶格中轉變成粉末狀的灰色錫，使焊點滲漏。氣溫上升，還是會(huì )產生漏水現象的。
1. If the location temperature of small beer brewing equipment is lower than -13.2 ℃, tin welding cannot be used for correction. At that low temperature, tin will change into powdery gray tin in the metal lattice, causing solder joint leakage. Water leakage will still occur when the temperature rises.
2、若小型釀酒設備很薄的話只能用防水膠修補，較厚的話可以鉆孔，用不銹鋼螺絲堵。清洗裂紋處油污，用砂布打磨氧化膜，再用螺絲刀或斷鋸條刮除干凈，用噴燈將鋁件加熱300℃-400℃(留意溫度不能太高)，將焊條在裂紋處涂擦，當焊條熔化時，用螺絲刀將熔化的焊條合金在裂紋處沖突，然后再逐漸加厚焊層。
2. If the small brewing equipment is very thin, it can only be repaired with waterproof glue. If it is thicker, it can be drilled and blocked with stainless steel screws. Clean the oil stain at the crack, polish the oxide film with emery cloth, scrape it off with a screwdriver or saw blade, heat the aluminum parts to 300 ℃ -400 ℃ (pay attention to the temperature should not be too high), and wipe the welding rod at the crack. When the welding rod melts, use a screwdriver to conflict the molten welding rod alloy at the crack, and then gradually thicken the welding layer.
3、
自動售酒機廠家認為在進行修正之前，有很多細節都是需要留意的，假如了解到小型釀酒設備自身的特點，一起把握到這些細節之后，那么小型釀酒設備漏水問題也可以及時的。并且小型釀酒設備在使用進程中，也需要不定時的做好檢查作業，避免影響釀制工藝和酒的質量。
3. The manufacturer of automatic wine vending machine believes that there are many details that need to be paid attention to before correction. If we understand the characteristics of small-scale brewing equipment and grasp these details together, then the water leakage problem of small-scale brewing equipment can also be solved in time. In addition, in the process of using small brewing equipment, it is also necessary to do a good job of inspection from time to time to avoid affecting the brewing process and the quality of wine.
小型釀酒設備的甄鍋具有反抗大氣氧化的才能---即不銹性，一起也具有在含酸、堿、鹽等介質中耐腐蝕的才能---即耐蝕性，使用壽數也比較長，在不改變任何工藝進程的前提下，免除了一些繁瑣的人工操作，所以使用起來簡略并且省工省時省力；并且冬季保溫性能好，上氣快，夏季表面不熱，進步酒的理化目標。
The screening pot of small brewing equipment has the ability to resist atmospheric oxidation - that is, rust resistance, together with the ability to resist corrosion in media containing acid, alkali, salt and other media - that is, corrosion resistance, and relatively long service life. Without changing any process, it eliminates some cumbersome manual operations, so it is simple to use and saves labor, time and effort; Moreover, it has good heat preservation performance in winter, fast aeration, and the surface is not hot in summer, which improves the physical and chemical goals of wine.
Therefore, in normal times, we should do a good job in the maintenance of small brewing equipment. For more information about the device, please follow our website http://m.sdlngcjx.com Consult and understand.
不銹鋼酒罐的產品概述及特點 2024-06-13 
