自動晾茬機是將攤晾、加漿、加曲、拌和、卸料等工序一次性完成，本機裝有多個軸流風機，經過風量的調整，使高溫涼茬在運送過程中降到規定的溫度，攤晾作用好。
The fully automatic stubble drying machine completes the processes of spreading, adding slurry, adding starter, mixing, and unloading in one go. This machine is equipped with multiple axial flow fans, and the air volume is adjusted to lower the high-temperature cool stubble to the specified temperature during transportation, which has a good spreading effect.
在攤晾過程中設置多個拌和設備，使晾茬在攤晾過程中松散、不易結坨，加漿、下曲均勻，數量可調整，經過設備可將漿水、曲粉、糧茬拌和均勻。
Multiple mixing devices are set up during the air spreading process to make the air stubble loose and less prone to clumping. The addition of slurry and downward bending are uniform, and the quantity can be adjusted. Through the equipment, the slurry, yeast powder, and grain stubble can be mixed evenly.
工人把出鍋用后的薦子鏟入該機后，主動加油、加水溫度適宜、主動卸料，晾茬網帶漏掉的薦子直接落入本機規劃的不銹鋼箱體內，整理后完全臥池利，整理簡便杜絕了浪費與環境污染現象。
After the workers shovel the recommended material from the pot into the machine, they actively add oil and water to the appropriate temperature, and actively discharge the material. The missed recommended material from the drying mesh belt directly falls into the planned stainless steel box of the machine. After sorting, it is completely lying in the pool and easy to organize, eliminating waste and environmental pollution.
安裝前，車間地面不需任何準備作業。還可根據需要，移動運用。與傳統工藝比較，大大下降勞動強度，縮短了時刻，并且整機配用動力小、作業時刻短、節約能源、涼薦作用更佳，完成機械主動化。
Before installation, there is no need for any preparation work on the workshop floor. It can also be used on the move as needed. Compared with traditional processes, it greatly reduces labor intensity, shortens time, and the whole machine is equipped with less power, shorter working hours, saves energy, and has better cooling effect, completing mechanical automation.
涼茬機的結構組成：
The structural composition of the stubble cooling machine:
1.主要由機架、風機、傳送帶和順次銜接于傳送帶上的攪籠、打料棍、翻料棍、下料設備、出料管組成.
1. It is mainly composed of a frame, a fan, a conveyor belt, and a stirring cage, a feeding rod, a flipping rod, a feeding equipment, and a discharge pipe that are sequentially connected to the conveyor belt
2.風機固定在傳送帶側端的機架上并少設置為三臺，所述的下料設備由下料斗和固接于下料斗下部的下料輥組成，所述的機架上設有高于傳送帶運送線兩邊的擋板。
2. The fan is fixed on a frame at the side end of the conveyor belt and is equipped with at least three sets. The feeding equipment consists of a feeding hopper and a feeding roller fixedly connected to the lower part of the feeding hopper. The frame is equipped with baffles higher than both sides of the conveyor belt conveyor line.
3.運用時，酒茬在傳送帶上經過，在打碎和拌和的一起風機作業，敏捷降溫，冷卻后的酒茬在下料設備中與酒曲主動混合均勻。
3. When in use, the stubble passes through the conveyor belt and operates with a fan during crushing and mixing, quickly cooling down. The cooled stubble is actively mixed with the koji in the cutting equipment.
4.提高了冷卻作用、下降了功耗，處理了現有設備自積阻塞現象，并完成了酒茬和酒曲的主動混合。
4. The cooling effect has been improved, power consumption has been reduced, existing equipment self accumulation blockage phenomenon has been dealt with, and the active mixing of wine stubble and wine yeast has been completed.
That's all for the explanation of the operation process and structural composition of the automatic stubble cooling machine. I hope it can be helpful to you. For more information, please come to our website http://m.sdlngcjx.com consulting service
不銹鋼酒罐的產品概述及特點 2024-06-13 
